10w Wireless Charger,Wireless Charger-M30,Hidden wireless charger,wireless charging pad,wireless charging stand Suitable for desktop and mobile phones

Hidden wireless charger
Support fast charging,simple and efficient
WITH FAN,FAST CHARGING,SPACE CHARGING,HIDE INSTALLATION,WATERPROOF AND DUSTPROOF SECURITY
Built in fan,overheated self start
High temperature protection,no worry about how to charge
Air inlet in the middle and air outlet on both sides

10W Fast charging
Easy and time saving
Put down automatic charging,support 10W fast charging More convenient Work and life
Hidden under the table the table is more tidy
The charger is hidden at the bottom of the table,and there is only one position prompt sticker on the desk
Free two kinds of charging position label
Transparent label , Black Label
When you put it on the spot,you’ll be full when you go out
Hidden waterproof and Dustproof
Table bottom hidden installation,waterproof and dustproof
It is directly fixed on the bottom of the table and can penetrate about 30mm Thick table
20mm and 30mm are available in 2 specifications
Applicable desktop materials
Can’t be used for metal tabletop,electromagnetic energy can’t penetrate metal
Wooden table , Glass table , Marble table , Plastic table
Code scanning charging
Support to open wireless charging function by scanning code,commercial environment.It can be managed intelligently without human intervention.
9 heavy protection is safer
Over power protection,Over current protection,Over temperature protection,Short circuit protection,Over voltage protection,Lightning protection,Electromagnetic field protection,Under voltage protection,Electrostatic protection
Charge everything,support all Qi wireless charging mobile phones And other equipment with Qi protocol,such as air pods Pro Mouse,etc
The red mark position is the middle position of wireless charging
PS:Xiaomi and Huawei mobile phone charging only supports 5W ordinary wireless charging.Devices that do not support wireless charging Just buy a wireless receiver that meets the Qi standard,and more supported models can be inquired online.
Hidden installation under table
Temperature controlled fan more intelligent and safer
When the temperature is about 50℃,the fan will turn on automatically to dissipate heat.The fan will turn off automatically when it is not charged

Double sided adhesive tape installation
1.Measure the position of the charger to be installed with a soft ruler,mark it,and wipe away the dust and dirt.
2.Tear off the double-sided adhesive tape,stick the charger to the marked position and press firmly.

Screw installation
1.Measure and mark the position of charger to be installed with a soft ruler.
2.Screw the charger to the bottom of the table (it is easier to install the charger by drilling holes with the tip of a knife first)

Steps 3 and 4 are common
3.Plug the charging connector into the charger and fix the cable with adhesive tape.
4.Plug the charger plug into the domestic power socket and connect it with the power supply,then it can be used normally.

Usage scenarios
Home use
Table top in living room,table,Computer desk/desk,bedside cupboard

Commercial premises
Dining table,bar counter,Coffee shop table,Hotel bedside table,Convenience store table,KTV table,Conference room table,airport lounge